Aldoro: Pigmentos metálicos

Paints Plastics Specialties
Paints
>
Industrial paints
>
Maritime Protective Paints (PMC)

Maritime Protective Paints (PMC)

Back to Industrial Paints

Description

STANLUX Paste Leafing: Leafing particle aluminum pastes whose characteristic is particle orientation on the uppermost layer of the paint film applied, resulting in a highly bright aesthetic effect with high coverage power, in addition to protection by barrier and reflection of light and heat. This line of products counts of varied options in particle sizes and solvent composition to meet specific requirements of each type Of application.

STANLUX Paste Leafing – Marine protection paints (PMC)

GRADE SOLIDS (%+-2%) LEAFING (% MÍN) WATER COVERAGE (CM²/G MIN.) GRANULOMETRY SOLVENT SDS BULLETIN
(>325 MESH % MAX) AVERAGE SIZE* (MICRONS)
100 65 60 14.000 1.0 18 WS / HA download
100N 65 60 14.000 1.0 18 HA download
120 65 70 20.000 1.0 17 WS / HA download
130 65 70 21.000 1.0 19 WS / HA download
130N 65 70 21.000 1.0 19 HA download
140 65 70 21.000 1.0 15 WS / HA download
340 N 65 70 9,000 7.0 21 HA download

*The specification of the “average size” is measured in the Equipment Mastersizer E – Malvern and is represented by the value of the D 50.

Solvents

The differentiated grades with “N” in their codes contain only high aromatic solvent and are specially recommended for paint formulations in systems with low tolerance ta aliphatic solvent, like the classic example of epoxy systems applied in marine coatings.

WS = White Spirit
HA = High Aromatics

Description

STANLUX Paste Non-leafing: They are aluminum pastes with non-leafing particles orientation, which are characterized by an excellent cost-benefit, protection by barrier, possibility of obtaining different metallic colors, in combination with colored pigments of high transparency.
Aldoro’s Stanlux Paste Non-Leafing line has a variety of particle sizes and solvent composition options to meet specific requirements for each type of application.

STANLUX Paste Non-leafing - Marine protection paints (PMC)

GRADE SOLIDS (%+-2%) GRANULOMETRY SOLVENT SDS BULLETIN
(>325 MESH % MAX) AVERAGE SIZE* (MICRONS)
1100 65 1.0 18 WS / HA download
1100N 65 1.0 18 HA download
1600N 65 1.0 23 HA download
1770 65 1.0 16 WS / HA download

*The specification of the “average size” is measured in the Equipment Mastersizer E – Malvern and is represented by the value of the D 50.

Solvents

The differentiated grades with “N” in their codes contain only high aromatic solvent and are specially recommended for paint formulations in systems with low tolerance ta aliphatic solvent, like the classic example of epoxy systems applied in marine coatings.

WS = White Spirit
HA = High Aromatics